How to configure your Toppy for Daylight Saving Using SmartEPG

1. DST USED in your location
New South Wales +11 and A.C.T, South Australia +10.5, Victoria +11, Tasmania +11, apply Daylight Saving Time.

In the Topfield Menu/Settings/Time page the settings below should be entered…..

Mode = Auto
Time Offset = NSW, ACT, VIC, and TAS +11; SA +10.5
Time Format = 12/24hrs according to your preference
DST = On

Set SE Menu:Item 26 Auto Summer time to "Manual (DST.ini)". A wakeup timer labelled "SmartEPG AutoDST" will be created 14 days ahead.

In addition, you need to set the TAP DSTConfig to the appropriate rule for your area. That TAP is normally in your Program Files folder. It usually only needs to be set once. However if you move to a different state then an adjustment may need to be done according to the DST rule for your new location. Further information and download here.

2. DST NOT used in your location
Queensland, Northern Territory, and Western Australia do not apply Daylight Saving Time

In the Topfield Menu/Settings/Time page the settings below should be entered…..

Mode = Auto
Time Offset = WA = +8, Northern Territory = +9.5, Queensland = +10
Time Format = 12/24hrs according to your preference
DST = Off

Set SE Menu item 26 to "No", then no wakeup timer will be created.

Unless otherwise stated, the content of this page is licensed under Creative Commons Attribution-ShareAlike 3.0 License